Monthly treatment contract
Cooling tower, boiler and chiller water treatment
The Yucatán Peninsula’s hard water builds scale in boilers and corrodes chillers. Every month we dose and test on site with our BM formulas, and you just review the report.
- EMA:
- Mexico’s laboratory accreditation body
- 98 invoiced clients since 2018
- EMA-accredited laboratories
- Local delivery in 1 to 2 business days
- Emergency service with a service contract
By system
- Cooling towers
Scale, corrosion and biofilm
Inhibitor, biocide and control of cycles of concentration.
Scale guide (in Spanish) → - Boilers
Scale, dissolved oxygen and blowdown
Feedwater softening and BM-86 descaling.
Control parameters (in Spanish) → - Chillers and closed loops
Corrosion in chilled water
BM-56 nitrite inhibitor with periodic readings.
Corrosion in cooling systems (in Spanish) → - Hot water
Yellow water and corroded water heaters
Food-grade BM-72 corrosion inhibitor dosed into the storage cistern.
See BM-72 (in Spanish) →
Monthly contract
You’re not buying chemicals; you’re buying a system that works
One fixed monthly price that includes the chemicals, the visit and the testing.
- Enough of our BM chemicals for the month
- Technical visit with on-site testing
- Dosing and blowdown adjustment
- Report for your maintenance log
Do you run your own treatment program? Buy the chemicals
20 L drums delivered in 1 to 2 business days in Cancún, Puerto Morelos and Playa del Carmen, with the recommended dose. Ask for a quote.
Why it matters
Benefits of chemical water treatment
Equipment protection
Prevents costly damage to boilers, heat exchangers and cooling towers.
Energy efficiency
Scale-free equipment runs with higher thermal efficiency and lower energy use.
Longer service life
Proper treatment can significantly extend the life of your equipment.
Regulatory compliance
Supports compliance with environmental and industrial safety regulations.
By application
Chemical treatment programs by application
Every system has specific needs. We design tailored programs based on water testing and operating conditions.
Boiler treatment
A complete program to prevent scale, corrosion and carryover in steam boilers. Includes chemicals, dosing and monitoring.
- Hardness and silica control
- Oxygen scavengers
- pH and alkalinity control
- Sludge dispersants
- Condensate line protection
Cooling towers
Control of scale, corrosion and biological growth in open and closed cooling water systems.
- Scale and corrosion inhibitors
- Oxidizing and non-oxidizing biocides
- Legionella control
- Biofilm dispersants
- Cycles of concentration monitoring
Closed systems
Protection of closed cooling and heating loops against corrosion and bacterial growth.
- Corrosion inhibitors
- Long-acting biocides
- pH control
- Compatible antifreeze
- Periodic monitoring
Wastewater treatment
Chemicals for clarification, pH adjustment and sludge conditioning in wastewater treatment plants.
- Coagulants and flocculants
- pH adjusters
- Defoamers
- Sludge conditioners
- Odor control
Full service
What our program includes
- Complete initial assessment
Water testing, equipment evaluation and program design
- Chemical supply
Scheduled deliveries
- Dosing equipment
Installation and maintenance of metering pumps
- Technical service visits
Monthly monitoring and program adjustments
- Laboratory testing
Monthly testing with detailed reports
- Staff training
Training for operators and maintenance staff
Quick quote
The cost of a program depends on several factors. Share this information for a more accurate quote:
- Equipment type and capacity (BHP, tons of refrigeration, etc.)
- Daily operating hours
- Water source (well, municipal, etc.)
- Current problems, if any
How we work
Our chemical treatment method
- 01
Initial assessment
Water testing, equipment evaluation and a review of the history of problems.
- 02
Program design
Selection of chemicals, dosing and a treatment frequency tailored to your system.
- 03
Implementation
Installation of dosing equipment, training and start-up.
- 04
Ongoing monitoring
Periodic visits, control testing and program adjustments based on the results.
Product line
Water treatment chemicals
Products for each application
| Category | Products |
|---|---|
| Boilers | Oxygen scavengers · Phosphates · Dispersants · Neutralizing (volatile) amines · Antiscalants |
| Cooling towers | Multifunctional inhibitors · Chlorine-based biocides · Non-oxidizing biocides · Dispersants · Antifoams |
| Wastewater | Aluminum sulfate · PAC (polyaluminum chloride) · Cationic polymers · Hydrated lime · Neutralizers |
| RO / membranes | Antiscalants · Compatible biocides · Acid cleaners · Alkaline cleaners · Preservatives |
Sectors this service covers
Chemical water treatment: frequently asked questions
About chemical treatment programs for boilers and cooling towers
What does a chemical treatment program include?
A complete program includes an initial assessment with water testing, selection of the right chemicals for your system, dosing equipment, staff training, periodic technical service visits, monthly control testing and follow-up reports.
How often are service visits made?
Usually monthly, to adjust dosing, check equipment and run control tests. In critical systems or systems with a history of problems, visits can start every two weeks until the program stabilizes.
What if my boiler already has scale buildup?
First, a chemical cleaning (descaling) removes the existing scale. Once the boiler is clean, the preventive program keeps new scale from forming. The cleaning can be done in operation or during a scheduled shutdown.
How much does a chemical treatment program cost?
The cost depends on the type of system, equipment capacity, water conditions and the treatment required. Every facility is different, so we recommend an assessment to define the right solution. Request a tailored quote.
How do I know the treatment is working?
We test key parameters every month: hardness, pH, alkalinity, iron, silica, conductivity and others. The results are compared against target ranges and delivered in reports that show trends and the status of the program.
What are the signs that a cooling tower needs urgent treatment?
The three main signs are cloudy or greenish water (uncontrolled microbiological growth), white or brown deposits on the nozzles and fill (calcium or silica scale), and an unusual rise in the outlet water temperature (efficiency loss from fouling). A sulfide odor or excessive foam is also a warning sign of anaerobic bacterial activity.
What is Legionella, and why are cooling towers a risk?
Legionella pneumophila is the bacterium that causes Legionnaires’ disease, a potentially fatal pneumonia. Cooling towers are a risk because they produce aerosols (microscopic droplets) that can spread the bacterium hundreds of meters. It thrives in water between 25 and 45 °C (77 and 113 °F) where there is biofilm. A treatment program with the right biocides and periodic Legionella testing is essential to prevent outbreaks.
Not sure what your system needs?
We test the makeup water and the tower or boiler water, and propose the treatment.